DIN 34crnimo6 ígwè gburugburu mmanya 1.6582 ígwè mmanya
Atụmatụ
34CrNiMo6 Steel bụ ihe dị mkpa alloy engineering steel ọkwa dị ka BS EN 10083-3: 2006.34CrNiMo6 ígwè nwere ike dị elu, ịdị elu siri ike na ezigbo ike ike.
A na-etinye 34CrNiMo6 na ụlọ ọrụ dịka ụgbọ elu, ụgbọ ala, ụgbọ ala, na nchekwa mba.34CrNiMo6 nwere ike nweta ọgwụgwọ okpomọkụ dị ka ịmegharị ahụ, iwe ọkụ, na imenyụ.A na-eji ya emepụta ụdọ, skru, gears, ogwe aka, rollers na akụkụ dị iche iche nke igwe.
Nkọwapụta
| Nha | Gburugburu | Ogologo ya bụ 6-1200 mm |
| Efere/Ahịhịa/Mgbochi | Ọkpụrụkpụ | |
| 6mm-500mm | ||
| Obosara | ||
| 20mm-1000mm | ||
| Usoro | EAF+LF+VD+Egoro+Ọgwụgwọ okpomọkụ(nhọrọ) | |
| Ọgwụgwọ okpomọkụ | Haziri ahazi;Annealed;Emenyụ ;Iwe | |
| Ọnọdụ ihu | Oji;Akpụchapụrụ;Achachapụrụ;Ejiri igwe;Ghichaa;tụgharịrị;Efere | |
| Ọnọdụ nnyefe | Ụgha;Hot akpọrepu;Oyi sere | |
| Nwalee | Ike tensile, ike mpụta, elongation, mpaghara mbelata, uru mmetụta, ike siri ike, nha ọka, ule ultrasonic, nyocha US, nyocha ihe ndọta, wdg. | |
| Oge Mbuga ozi | 30-45 ụbọchị | |
| Ngwa | A na-eji 34CrNiMo6 maka igwe axle dị arọ, eriri igwe turbine, akụkụ dị elu nke nnyefe, ihe nkedo, crank shafts, gears, yana akụkụ buru ibu maka owuwu moto wdg. | |
Ngwakọta kemịkalụ (%)
| Carbon C | 0.3-0.38 |
| Silicon Si | 0.4 |
| Manganese Mn | 0.5-0.8 |
| Sulfur S | 0.035 |
| Phosphorus P | ≤ 0.025 |
| Chromium Cr | 1.3-1.7 |
| Nickel Ni | 1.3-1.7 |
| Molybdenum Mo | 0.15-0.3 |
Ihe eji arụ ọrụ
| Ike tensile σ b (MPa) | 850-1400 |
| Ike mpụta σ s (MPa) | ≥690 ~ 1000 |
| Mgbatị δ (%) | ≥9 ~ 15% |
| Isi ike | 239-259 HB |
| Ọkọlọtọ dị iche nha nhata | |
| Ọkwa | Ọkọlọtọ |
| 34CrNiMo6 (1.6582) | EN 10083-3 |
| 4337 | ASTM A29 |
Ọnọdụ nnyefe
Ogwe na-ekpo ọkụ na-ekpo ọkụ, na-abụkarị ọnọdụ nnyefe na-ekpo ọkụ na-ekpo ọkụ, annealed/QT siri ike tụgharịa/obere elu.
Ogwe akpọrepu ọkụ na-ekpo ọkụ, na-abụkarị ọnọdụ nnyefe na-ekpo ọkụ, annealed/QT, elu ojii.
Ndidi
| Dayameta (mm) | Ndidi | ||
| Ogwe gburugburu Steel Forged | 80-600 | Elu ojii: 0 ~ + 5 | Ejiri ma ọ bụ tụgharịa: 0 ~ + 3 |
| 650-1200 | Elu ojii: 0 ~ + 15 | Ejiri ma ọ bụ tụgharịa: 0 ~ + 3 | |
| Hot Rolled Steel Round Bar | 16-310 | Elu ojii:0~+1 | Ekpochara:H11 |
| Oyi Dịrị okirikiri Ogwe | 6-100 | Elu ojii:H11 | Ekpochara:H11 |
ngwugwu
1.By bundles, onye ọ bụla ngwugwu arọ n'okpuru 3 tọn, maka obere mpụta
dayameta gburugburu mmanya, nke ọ bụla ùkwù nwere 4 - 8 ígwè ibe.
2.20 ụkwụ akpa nwere akụkụ, ogologo n'okpuru 6000mm
3.40 ụkwụ akpa nwere akụkụ, ogologo n'okpuru 12000mm
4.By nnukwu arịa, ụgwọ ibu dị ala site na nnukwu ibu, na nnukwu
Enweghị ike ibuba nha dị arọ n'ime arịa nwere ike ibupu site na nnukwu ibu
Asambodo Ogo: Enyere na Bekee, na mgbakwunye na usoro nkịtị, usoro mmepụta, ihe eji arụ ọrụ (mkpụrụ ike, ike tensile, elongation na hardness), arụrụ arụ ọrụ, nsonaazụ ule UT, nha ọka, ụzọ ọgwụgwọ okpomọkụ na ihe atụ nke bụ. egosiri na Asambodo Ogo.
Akara: Okpomọkụ No. ga-abụ oyi stampụ na ọkwa ígwè, dayameta (mm), ogologo (mm), na-emepụta LOGO na arọ (kg) na-ese.
Ntụkwasị obi ịdị mma
1. Kwụsie ike dị ka achọrọ
2. Nlereanya: Nlereanya dị.
3. Nnwale: Nnwale ịgba nnu nnu / ule tensile / Eddy current / Chemical mejupụtara ule dị ka arịrịọ ndị ahịa si dị.
4. Akwụkwọ: IATF16949, ISO9001, SGS wdg.
5. EN 10204 3.1 Asambodo
